When a horizontal mixer is working and mixing, the material inside the mixer is subjected to two opposite rotors, which perform a composite motion. The blades of the mixer rotate counterclockwise along the inner wall of the machine slot with the animal material, and on the one hand, the animal material flips left and right. In the weight loss area where the two rotors intersect and overlap, regardless of the shape, size, and density of the material, the material can float up in an instantaneous weight loss state, This causes the materials to form a continuous and all-round circulation in the machine slot, alternating and shearing with each other, thereby achieving a fast, soft and uniform mixing effect.
The single axis horizontal mixer can be widely used in the mixing of powder and slurry in putty paste, real stone paint, dry powder, putty, medicine, food, chemicals, feed, ceramics, refractory materials, and other industries, such as chemical industry, composite fertilizer, dyes, pigments, rubber, building materials, refractory materials, rare earth, plastic glass, and new materials, nuclear energy materials, etc Mixing of solid slurry (i.e. powder and slurry) materials.
Advantages of single shaft horizontal mixer products:
1. Convenient cleaning: It meets the requirements of timely, convenient, and fast cleaning of the equipment interior for each batch and shift, without leaving any blind spots.
2. High mixing uniformity: A single shaft horizontal mixer can evenly mix materials with a ratio of 1:10000, especially for materials with larger specific gravity characteristics.
3. Fast mixing speed and high efficiency: Single shaft horizontal mixers usually achieve full mixing and stirring in 1-10 minutes for each batch of materials, which increases the efficiency by 6-10 times or more compared to other mixers.
4. Fast and convenient discharge: Usually, a batch of materials is discharged in 1-2 minutes.
5. Large loading capacity: Single shaft horizontal mixers usually have a loading capacity (loading coefficient) of over 70%.
6. Low residual amount: Users have always believed that horizontal equipment has a large residual amount, but in reality, this is not the case. Due to the small gap between the outer spiral belt and the U-shaped cylinder wall during the processing, and the spiral belt has been running continuously during discharge, causing the material to move towards the discharge valve direction and almost all discharge.
7. Satisfy vacuum feeding and dust-free discharge, avoiding dust flying during the entire feeding, mixing, and discharge process.
8. The mixing process is gentle and basically does not damage the original state of the material.
9. No pollution to materials: The mixing mechanism of the single shaft horizontal mixer is integral, safe and reliable, and all corner welds transition smoothly and are easy to clean; The lubrication parts are all located outside the barrel, without any dripping oil or debris penetrating the material. They can be sealed for operation to isolate dust from the air from entering the material.
10. Low requirements for the factory building: The equipment is horizontal, and various forms of driving devices and discharge positions can be freely selected, regardless of the height or floor area of the factory building.
11. The single shaft horizontal mixer operates smoothly and reliably, with fewer vulnerable parts, long service life, and easy maintenance and operation.
