The internal structure of the chain crusher is mainly composed of the upper body, the inner lining plate, the crushing tool, the lower body, the fan, the rotor, the discharge pipe, the underframe, the bag filter and other parts. The lining plate increases the wear resistance of the equipment; The dust removal equipment solves the dust pollution problem more humanized. Workers will not be polluted by dust during operation; When entering the crushing room, the rotating tool, the tooth plate of the lining plate and the added materials are quickly crushed into powder under the combined action of the strong impact of the tool, high-speed impact and friction.
The feed inlet of the chain crusher is made of wood powder granules. The body is made of stainless steel door cover, chute and feeder. The feeding adopts frequency conversion and speed regulation to ensure uniform feeding. Ensure that the service life of mechanical equipment is extended, the product quality is improved, and the consumption cost per ton is reduced. Using the manufacturing process, you can customize the molds for various raw materials for your various wood pulverizers. The wood pulverizer effectively solves the shortcomings of difficult granulation of biomass coarse fiber and poor effect. The main drive adopts gear drive and quick-discharge hoop type. The output is about 15% higher than that of belt drive type.
When the crusher and sander is fed, an unbalanced process of about 30~60s usually occurs. In this case, the feed cannot be stopped, and the feed rate should be increased as much as possible until the vibration is reduced. When the feed particles are large, intermittent vibration will occur and return to the normal state after a few seconds. This is due to the fact that a certain throwing head of the rotor is stagnant, and the normal situation caused by the accumulation of the stored material is eliminated. tension. The rotor wear parts of the chain crusher are designed to protect the rotor body from wear. The chain crusher is mainly composed of shell, rotor, hammer, chain crusher manufacturer’s telephone, lining plate, screen plate, etc. No component has its own functions and different obligations. The price list of chain crusher and the whole crushing operation are carried out.
