Fertilizer granulator machine

Why is the dryer often used to treat fertilizer in the production of cow manure organic fertilizer

by organic fertilizer production line

Poultry manure is increasingly polluting the environment. However, cow manure is rich in nutrients and trace elements and is a good organic fertilizer. The fertilizer production line develops cow dung as a compound organic fertilizer, which can not only turn waste into treasure, but also reduce environmental pollution and prevent the spread of diseases, which has good economic and social benefits.

Our fertilizer granulator machine price is low, and the dryer is of high quality and low price. There is a section of secondary granulation area at the front of the dryer, and the material can realize secondary granulation in this section. Then the material is lifted up by the lifting plate to fully dry the material. The tail of the dryer draws out the moist hot air through the pipe through the exhaust fan, and enters the settling chamber to settle. After passing through the settling, the exhaust gas passes through the washing tower to spray dust and spray water. It is pumped out by a water pump for recycling, and after the second dust reduction treatment, the exhaust gas is discharged into the atmosphere through the chimney.

The main features of the dryer machine are as follows

1. Cow dung dryer has high degree of mechanization, large production capacity and continuous operation.
2. The organic fertilizer machine has an excellent and simple structure, and the material runs smoothly through the resistance of the cylinder and is easy to operate.
3. The cow dung dryer has fewer failures, low maintenance costs and low power consumption.
4. Wide application range and good product drying uniformity.
5. Sterilization and deodorization can be achieved while drying.
fertilizer equipment for sale

How to Solve the Problem of Material Agglomeration in Organic Fertilizer Fermentation

by organic fertilizer production line

Use a compost turning machine to process fermented materials. During the composting process, technologies such as adjusting the carbon to nitrogen ratio, controlling the stack temperature, ventilation and moisture can be used to deodorize. The animal manure treatment in the farm has been mechanized, which solves the environmental pollution problem caused by the farm. The fertilizer granulator processes the compost and obtains more benefits.

In water management, if there is less water, the frequency can be reduced to prevent the slow down of fermentation speed and the decrease of microbial activity. If the turning frequency of the compost turning machine is high, the fermentation facilities can be closed to reduce heat dissipation, or the outer wall of the fermentation facilities can be built with insulation materials to maintain the temperature, or other heat sources can be used to heat up to prevent the temperature drop.
Caking of fermentation materials: there are large parts of fermentation materials in the heap, and the structure is inconsistent.
Possible causes and solutions:
1. The raw materials are not mixed evenly or the compost turning machine is not enough. Improve the original mixing method.
2. Uneven air flow or insufficient air circulation: sorting or crushing compost to improve air distribution.
npk fertilizer production line

What are the advantages of chicken manure organic fertilizer production line in processing fertilizer

by organic fertilizer production line

At present, the actual utilization rate of chemical fertilizer in China is only 30% – 45%, even lower in some regions! After the application of organic fertilizer, the beneficial biological activity improves the soil structure, increases the soil water and fertilizer conservation capacity, thus reducing nutrient loss, and increasing the effective utilization rate of chemical fertilizer to more than 50%. It can also reduce the amount of chemical fertilizer and the cost of fertilization. Since the 1970s and 1980s, the UK, France and Japan have reduced the use of pesticides and fertilizers. Organic fertilizer is the main fertilizer. The use of chemical fertilizers and pesticides has been greatly reduced. The grain output has increased and the quality is much better than before. Therefore, the fertilization method of “giving priority to organic fertilizer, supplemented by chemical fertilizer” is a reasonable fertilization method at present!

More and more farmers are looking for ways to produce organic fertilizer as the organic movement continues to grow. While there are many commercial products available, some farmers are choosing to make their own fertilizer using organic production equipment.

There are a few things to keep in mind when using organic fertilizer production equipment. First, it is important to choose the right equipment for your needs. There are a variety of organic fertilizer production systems available, so it is important to select the one that best fits your operation.

Second, it is important to follow the manufacturer’s instructions when using the equipment. This will ensure that you are using the equipment properly and that you are getting the best results.

Finally, it is important to monitor the organic fertilizer production process carefully. This will help you troubleshoot any problems that may arise and make sure that the fertilizer is being produced correctly.

organic fertilizer granulator

Process introduction and operation method of mixer in npk fertilizer production line

by organic fertilizer production line

The mixer is used for mixing and mixing materials to realize the balanced collocation of different raw materials. In the fertilizer production line, the thoroughly mixed materials can be granulated by the fertilizer granulator.

The fertilizer mixer should be equipped with secondary leakage protection device. After the power supply is connected, it must pass the test run without load before it can be used. During the commissioning of the mixer, it is necessary to check whether the speed of the mixing drum is appropriate. In general, the speed of the empty car is slightly faster than that of the truck (after loading). If there is a large difference, the ratio of the driving wheel and the driving wheel should be adjusted.

Uses and characteristics of fertilizer mixer:

The mixing equipment is mainly used for the mixing of raw materials. The Huaqiang mixer disc is lined with polypropylene or stainless steel, so it is not easy to stick to the material. Wear-resistant, the use of cycloid reducer has the characteristics of compact structure, convenient operation, uniform mixing, convenient unloading and conveying. The disc mixer adopts polypropylene plate lining or stainless steel plate, so it is not easy to stick to the material. Wear-resistant, the use of cycloid reducer has the characteristics of compact structure, convenient operation, uniform mixing, convenient unloading and conveying. It is used for npk production line.

Working principle of fertilizer mixer:

Start the main mixing motor, drive the mixing parts through the sprocket speed reduction drive. According to the formula set by the electronic instrument, various raw materials are respectively put into the organic fertilizer mixer through the loader or manually. Through the cooling system, various materials with good statistics are mixed, overturned, sheared and kneaded in the mixer to achieve the purpose of fully mixing various raw materials and strains Finally, the discharging motor drives the gate to open and close to realize the discharging operation. Rotary drum granulator can meet the needs of material production.
Fertilizer granulator machine

Various types of composting turnover machines for organic fertilizer fermentation

by organic fertilizer production line

In the process of organic fertilizer production, users choose the suitable production equipment and machine model according to the output of their own factory. The quality of organic fertilizer fermentation is guaranteed by the compost turning machine, and the fermented material is suitable for the deep processing of organic fertilizer granulator machine.

The fermentation equipment used in organic fertilizer processing includes self-propelled windrow turner, crawler turner, trough compost turner, roulette turning machine, chain plate turner, organic fertilizer fermentation tank and so on. There are many choices of fermentation equipment, and the prices vary greatly. Users need to choose according to their own factory production needs.
Tank type compost turning machine is one of the most widely used types in organic fertilizer plants.
1. Automatic discharging device can be selected to improve the efficiency and convenience of material in and out
2. It can realize the operation of one machine with multiple tanks and save equipment investment
3. According to the design requirements, aeration system can be installed at the bottom of fermentation tank to realize static aeration and auxiliary oxygen filling to materials.
4. It is recommended that the turning machine should be combined with the solar fermentation room with heat preservation control, which is more economical and practical.
organic fertilizer granulator

How to Make Animal Manure into Fertilizer by Organic Fertilizer Granulator

by organic fertilizer production line

Taking into account the use of efficient fertilizers and chemical pesticides, the continuous decline of organic content in soil, and the bleak situation of soil sales, crop yield, and low quality, the entire engineering and technical personnel and experts and professors of the Academy of Agricultural Sciences have developed a bio fertilizer granulator with chicken manure, pig manure, humic acid, and wastes with high organic content as the main raw materials through repeated tests, making contributions to the healthy development of agriculture.

1: Fermentation. The main function of the fermentation part of the organic fertilizer production line is to reduce the water content in the organic fertilizer raw materials at an early stage. The raw materials of organic fertilizers are mainly chicken manure, pig manure, sheep manure and other animal manure, cow manure and sheep manure, but the humidity of chicken manure and pig manure is too high. In particular, the initial humidity of chicken manure and pig manure is generally above. It is impossible to handle such high humidity in person. It must go through the fermentation tank. Generally, the humidity of fresh chicken manure can be reduced to below by fermenting for about a week. In addition, during the fermentation of chicken manure, crude fiber materials such as bran and bran are mixed together, which tells you the key to shorten the fermentation time and reduce the cost.

2: Broken part. The feces of fermented animals are gathered together, and the massive materials are not directly dried, so it is better to use a small crusher to crush them first, and then enter the next stage. In organic fertilizer equipment, the crushing part is often essential.

3: Drying part. Here, some friends will ask how to dry again instead of fermenting. Otherwise, the fermentation can only adjust the humidity. In fact, to make organic particles, water must be below, so the drying process is also necessary.

4: Granular part. Organic fertilizer granulator is the key link of the whole organic fertilizer production line. In general, it is recommended to use the combination of pelletizer ball shaping machine for particle function, rather than traditional pelletizer ball shaping machine. The advantages of this method are high particle forming rate and good density.

5: Cooling, packaging and linking. Cooling and packaging can be ignored by a small number of production users. Users with small amount of production can dry by themselves, and only need to pack bags manually. The automatic packing machine only needs a large number of organic fertilizer production lines. The fertilizer produced by organic fertilizer equipment is an ideal fertilizer for saving agricultural production investment, improving soil fertility, increasing yield, optimizing crop quality and promoting green food and green agriculture.

fertilizer equipment for sale

How to use organic fertilizer composter reasonably and efficiently

by organic fertilizer production line

In organic fertilizer fermentation, livestock manure and other materials, domestic waste, sludge and other fertilizer making base materials should be piled on the flat ground in a choppy manner. When the tank turning machine is used to ferment organic fertilizer, the material is directly put into the fermentation tank. In the fermentation process, compost turning function is used to provide the quality of organic manure fermentation.

Organic fertilizer raw material processing and fermentation skills

(1) Ferment with weeds and crop straws (it will decompose in about 25 days):
Use crushed weeds and crop straws (generally 3-5 cm in length), which can be adjusted with 40% manure or biogas slurry; 2% urea (46% nitrogen) or equal nitrogen fertilizer can also be used Compound fertilizer can be adjusted; it can also be adjusted by adding fresh livestock and poultry manure at a weight ratio of 3:1-4:1. The decomposed compost is processed by the rotary drum granulator to produce different kinds of compound fertilizers.
(2) Fermentation with pure feces (it will decompose in about 20 days):
Mixing is to fully mix livestock and poultry manure with high moisture content with auxiliary materials and high-temperature biological fermentation bacteria in a certain proportion to reach fermentation conditions. Organic wastes such as livestock manure can be fermented directly. The purpose of mixing is to achieve high-temperature aerobic fermentation conditions through mixing, and to make the materials have good permeability. The high-temperature aerobic trough compost turning machine has a good effect on the treatment of organic fertilizer, and all the raw materials are mixed evenly during the fermentation process.
(3) Fermentation with manure (it will decompose in about 15 days):
After expanding the volume of bacteria directly, remove a layer in the enclosure evenly, stir it, and stack it directly on the fermentation tank. Repeat the operation. If the water content is too large, add appropriate amount of broken dry auxiliary materials into the enclosure to adjust. The decomposed compost is further processed with an organic fertilizer granulator machine.
Fertilizer granulator machine

Operating procedures of crusher in npk fertilizer production line

by organic fertilizer production line

Urea crusher is used to crush large granule urea to make material suitable for NPK production line granulation. In order to maintain the equipment and avoid unnecessary faults, strictly abide by the operation specification.

Here the fertilizer granulator manufacturer briefly introduces the operating procedures of this crusher.
(1) Before leaving the factory, the motor of urea mill has been sealed with lead and the coupling has been corrected. Do not loosen the parts at will;
(2) Regularly clean up the iron impurities on the permanent magnet cylinder and the permanent magnet plate of the feeder of the pulverizer;
(3) Regularly check the fineness of the crushed products to ensure that the materials are suitable for the rotary drum granulator.
(4) Clean or replace the bag of the dust collector regularly (ensure the air permeability of the bag), and regularly check the working condition of the solenoid valve (to see if it can work normally);
(5) Regularly check the wearing condition of each vulnerable part of the pulverizer to see if it belongs to normal wear;
(6) Always pay attention to the vibration of the crusher;
(7) When the hammer piece of the pulverizer is seriously worn and needs to be replaced, it is necessary to weigh it to ensure that the weight difference between the two opposite hammer pieces on the two relative hammer pin shafts is ≤ 1g, and the total weight difference of the hammer pieces on the two relative hammer pin shafts is ≤ 2G;
(8) When installing the screen, pay attention to whether the screen is properly worn and installed, and whether the screen needs to be replaced properly;
(9) The opening degree of the air supply door of the impeller feeder should be adjusted appropriately;
(10) If abnormal conditions such as large vibration and high noise of the crusher are found, it should be shut down immediately for inspection;
(11) 80 grams of grease should be added to the spindle bearing after every 40 hours of operation, but only to 60%. After 1800 hours of operation, the bearing box cover should be removed and all used grease should be replaced. When changing to fresh grease, add grease to the area around the rollers and bearing rings, and add 1/3 to 1/2 of the grease to the bottom case. Do not add too much grease;
(12) When it is found that the output of the grinder suddenly drops, in addition to the factors of raw materials, check whether the air supply door is in place, whether the pipeline is leaking, whether the pulse bag is blocked, whether the solenoid valve, fan is working normally, etc.
organic fertilizer granulator

Which raw materials are suitable for the double roller granulator of organic fertilizer

by organic fertilizer production line

Double roller granulator is a molding machine that can make materials into specific shapes. It is especially suitable for the granulation effect of ammonium bicarbonate, ammonium chloride, monoammonium phosphate, etc. The balling rate reaches 85%, and it is not dry and has low investment.

  1. Thedouble roller granulatorhas no drying process, and the granules are formed at room temperature in one time, with less investment and good economic benefits.
  2. The reliability of small power operation, three kinds of wastes without emission, stable operation, convenient maintenance, reasonable process layout, advanced technology and low production cost.
  3. The raw materials of the double roll extruding granulator are highly adaptable, which can be used to granulate a variety of raw materials such as compound fertilizers, pharmaceuticals, chemicals, feeds, coal, metallurgy, etc., and can produce a variety of concentrations, including organic fertilizers, inorganic fertilizers, biological fertilizers, magnetic fertilizers, etc.
  4. Roller type extruder, especially the compound fertilizer particles of rare earth, ammonium bicarbonate and ammonium sulfate.

Working principle of the double roller granulator: the motor drives the belt and pulley, which are transmitted to the drive shaft through the reducer. At the same time, the open gear and manual shaft are operated, materials are added to the hopper, and the finished particles (balls) are extruded into shaped balls by the double rollers. The payment chain sends the finished particles (balls) to the crushing chamber for crushing. The finished particles (balls) are separated from the body, the materials and new raw materials are mixed together, and then the particles are crushed, The motor continues to rotate and the material continues to flow in.

npk fertilizer production line

Maintenance method of batching control equipment in npk fertilizer production line

by organic fertilizer production line
The electronic batching scale is used to mix various materials in NPK production line, so that the chemical fertilizer is allocated in proportion to meet the characteristics of crop fertilizer demand. So how to maintain the batching scale and electronic control part?

1. The control room should be clean, dry and ventilated. It is better to install air conditioning to keep the indoor temperature constant;
2. After each shutdown and restart of the system, the host and channel instrument should be powered on and preheated for 15min before putting into operation;
3. Observe the pointer of the milliammeter. Under heavy load, it should not exceed 10mA. Ensure the uniform output of materials and facilitate the processing of fertilizer granulator;
4. Maintain the pre-pressure of the scale body. Normally, it is 1～2mA for no load (indicated by the pointer of the meter), and 6～8mA for heavy load, otherwise the sensor should be readjusted or replaced;
5. The sensor should be fixed on the mounting base, and the cable connecting the amplifier should not be loose;
6. The control cabinet should be fixed by embedded screws, and the shell should be grounded reliably (the grounding resistance is less than 4Ω);
7. There should be no vibration source, radiation source and strong electromagnetic source in the control room;
8. It is strictly prohibited to prevent tea cups, rice bowls and other objects on the control counter, and to prevent electric furnace and other heating equipment under the control cabinet;
9. Regularly clean the main engine, channel controller and other electrical appliances in the control cabinet to keep the interior clean;
10. After the batching system is shut down, if it is not used for a long time, all the power supplies of the main engine, channel instrument and electrical appliance shall be turned off; if the system is shut down for more than 15 days, the host and channel instrument shall be powered on and preheated for more than half an hour every 15 days to prevent moisture intrusion.

Back To Top