The NPK (nitrogen phosphorus potassium compound) fertilizer production line uses a roller extrusion granulator to produce fertilizers, which is a complex and precise industrial process involving multiple steps such as raw material preparation, mixing, extrusion, molding, and post-processing. Below is a detailed introduction to this process:.jpg)
1. Raw material preparation
Firstly, collect all necessary raw materials, including nitrogen fertilizers (urea, ammonia, etc.), phosphorus fertilizers (monoammonium phosphate, diammonium phosphate, etc.), potassium fertilizers (potassium sulfate, potassium chloride, etc.), as well as any other trace elements or fillers that may be added. These raw materials must be accurately measured in proportion.
2. Mixing and preprocessing
Feed the weighed raw materials into the mixer for thorough mixing, ensuring that all components are evenly distributed. During the mixing process, it may be necessary to add appropriate moisture or other liquid additives for subsequent extrusion molding.
3. Extrusion granulation
The mixed raw materials are transported to the feeding inlet of the roller extrusion granulator. A roller granulator consists of two or more roller shafts that rotate relative to each other, with a certain gap in between. When the raw material passes through this gap, it is compressed under strong pressure and extruded into long strips or sheet-like objects through the mold holes, and then immediately cut into particles of the desired length by the cutter.
4. Cooling and solidification
The fertilizer particles just extruded from the roller are in a high temperature state and need to be cooled to prevent deformation or melting. Send the particles through a conveyor belt into a cooling tower or air cooling device to gradually cool them down to around room temperature and accelerate the solidification process.
5. Hierarchical screening
The cooled particles enter the screening machine and are classified according to particle size. Particles that do not meet the size standards will be re crushed and returned to the previous process for granulation until they meet the set standards.
6. Encapsulation treatment (optional)
In order to improve the appearance quality and moisture and corrosion resistance of fertilizers, some production lines will also add a coating step after granulation. Coating a thin protective layer on the surface of the particles can not only beautify the appearance but also extend the shelf life.
7. Packaging and Storage
Finally, qualified fertilizer particles are weighed, bagged, and sealed to complete the finished product packaging. The packaged fertilizer bags are sent to the warehouse for storage, waiting for distribution and sale.
In the entire production process, the roller extrusion granulator is the core link, and its performance directly affects the quality, strength, and uniformity of the particles. A well-designed production line should balance efficiency and quality, ensuring that each batch of fertilizer meets high industry standards. Through continuous technological innovation and optimization, the NPK fertilizer production line continuously improves production capacity and product competitiveness, serving the needs of global agricultural development.
